Sunday, August 28, 2011

Mini6410 ARM11 Development Board






Mini6410  ARM11 Development Board
Mini6410 - ARM11 S3C6410 with TFT 4.3 inch Touch Screen Dev Board (256 MB NAND Flash)

The Mini6410 development board is an excellent ARM11 board offering a comprehensive solution integrating both hardware and software. It is designed, developed and distributed by Friendly ARM in Guangzhou, China. It applies the Samsung S3C6410 microprocessor and inherits all the features and benefits of our most popular Mini2440 products excelling in quality and easy to use with low cost. Compared to our previous products it has more reliable design and varied interfaces. These features make it easily and widely used in MID development, auto electronic devices, industrial applications, GPS systems and multimedia systems. It is good for educational training, embedded development and DIY as well.

In general the Mini6410 board has the following interfaces:
Double LCD interfaces,
4-wire resistor touch screen interface,
100M Ethernet interface,
DB9 5-wire serial port
Mini USB 2.0-OTG interface
USB Host 1.1 interface,
3.5mm audio output
On board microphone interface,
TV-OUT
SD card socket,
Infrared receiver,
TTL serial port,
CMOS camera interface,
40pin bus interface,30pin GPIO interface (it can be multiplexed to SPI, I2C and interrupts. It includes 3ADC and 1 DAC.),
SDIO2 interface (can be connected to SD WiFi module),
10pin JTAG interface,
PWM buzzer,
I2C-EEPROM,
backup battery for RTC,
1AD adjustable resistor,
8 x User button,
4 x LED
All these benefits, combined with our dedicated 4.3-inch LCD, bring you wonderful experience: all in your hand!

In addition we make the best use of the SD booting feature, by using our specially developed Superboot, enabling the board bootable from an SD card. With Superboot users can copy various systems (WindowsCE6/Linux/Android/Ubuntu/uCos2) into an SD card (up to a maximum memory of 32G) and install them on the board without connecting to a PC, or run them on the SD card without burning systems onto the board. In one word, this one-minute booting process is “Revolutionary to System Installation and Running”.
Customers can get the latest information and news about our products by visiting:   http://www.arm9.net














Mini6410 Hardware Features
CPU
- Samsung S3C6410A, ARM1176JZF-S, 533Mhz, maximum 667Mhz

DDR RAM
- On board 256M DDR RAM (128M Optional)
- 32bit Data Bus
FLASH Memory
- On board 128M/256M/1GB SLC Nand Flash or 2GB MLC Nand Flash
LCD
- Four-wire touch screen interface
- Support black and white, 4 level grayscale, 16 level grayscale, 256-color4096-color
STN LCD, 3.5-inch to 12.1-inch, screen resolution 1024x768;
- Support black and white, 4 level grayscale, 16 level grayscale, 256-color, 64K-color,
true color TFT LCD, 3.5-inch to 12.1-inch, screen resolution 1024x768,

Interfaces and External Accessories
- 1 * 100M Ethernet RJ-45 port (powered by the DM9000 network chip)
- 1 * DB9 RS232 five-wire serial port (with 4 TTL serial ports)
- 1 * mini USB Slave 2.0 with OTG
- 3.5mm dual stereo audio output and single microphone input
- 1 * TV-OUT output with RCA port
- 1 * USB Host 1.1 port
- 1 * standard SD card socket
- 1 * Infrared receiver
- 5V power supply
- 1 * I2C-EEPROM chip (256 byte), for I2C Bus test
- 4 * USER LED (green)
- 8 * USER Button (interrupt pins, extended from board)
- 1 * Adjustable resistor, for AD conversion testing
- 1 * PWM buzzer
- Onboard real-time clock backup battery

Extended Interfaces
- 4 * Serial port socket (TTL, 2.0mm spaced socket)
- 1 * 10 pin 2.0mm spaced JTAG interface
- Double LCD Interfaces (one 41 pin connector compatible with Mini2440 LCD and the
other 40 pin 2.0 mm spaced doubled line connector)
- 1 * 20pin 2.0mm spaced SDIO interface (can be connected to SD WiFi and include an
SPI and an I2C)
- 1 * 20pin 2.0mm spaced CMOS camera interface
- 1 * 30 pin 2.0mm spaced GPIO port
- 1 * 40 pin 2.0mm spaced system bus interface
- 1 * 10pin 2.0mm spaced button socket including 8 interrupt pins, power and ground
PCB Overview
- PCB layer: 6
- 110 x 110 mm

OS Support
The Mini6410 development board currently can load the following operating systems:

- Linux2.6.38(or latest) + Qtopia-2.2.0 + QtE-4.7.0
- WindowsCE.NET 6.0(R3)
- Android 2.3.2 (or latest)
- Ubuntu-0910

User Manual (PDF)
Mini6410 Development Board

Mini2440 Development Board

  




Mini2440 Development Board
mini2440 - 3.5 inch TFT Touch Screen S3C2440 ARM9 Development Board (1GB NAND FLASH)

Mini2440 is a practical low-cost ARM9 development board, is currently the highest in a cost-effective learning board. It is for the Samsung S3C2440 processor and the use of professional power stable core CPU chip to chip and reset security permit system stability. The mini2440 Immersion Gold PCB using the 4-layer board design process, professional, such as long-wiring to ensure that the key signal lines of signal integrity, the production of SMT machine, mass production; the factory have been a strict quality control, with very detailed in this manual can help you quickly master the development of embedded Linux and WinCE process, as long as there is C language based on the general entry to two weeks. Users can go to our website, http://www .arm9.net, and download the latest update to inform the latest manuals and systems.

CPU Processor
- Samsung S3C2440A, frequency 400 MHz, the highest 533 MHz

SDRAM Memory
- On-board 64MB SDRAM
- 32-bit data bus
- SDRAM clock frequency up to 100 MHz

FLASH Memory
- On-board 64 MB NAND flash, Power-down non-volatile
- On-board 2 MB NOR flash, Power-down non-volatile, BIOS has been installed

LCD Display
- On-board integrated 4-wire resistive touch screen interface, you can directly connect 4-wire resistive touch screen
- Support for black and white, 4 gray-scale, 16 gray-scale, 256-color, 4096-color STN LCD screen size from 3.5; to 12.1;, 1024x768 pixels screen resolution can be achieved
- Support for black and white, 4 gray-scale, 16 gray-scale, 256-color, 64K-color, True Color TFT LCD screen size from 3.5; to 12.1;, 1024x768 pixels screen resolution can be achieved.
- Standard configuration for the NEC 256K-color 240x320/3.5; TFT True
Color LCD screen with touchscreen.
- Leads to a 12 V power supply on-board interface, for the large-size TFT LCD 12 V CCFL backlight module (inverting) power supply


Interfaces and Resources
- 1 100 Mbps Fast Ethernet RJ-45 interface (used network chips DM9000)
- 3 Serial ports
- 1 USB host
- 1 USB slave (B-type interface)
- 1 SD card storage interface
- 1 channel stereo audio output interface, all the way microphone interface
- 1 2.0mm pitch 10-pin JTAG interface
- 4 User LEDs
- 6 User buttons (with lead blocks)
- 1 buzzer PWM control
- 1 adjustable resistor, analog-to-digital converter for A/D test
- 1 I2C-bus AT24C08 chip for I2C-bus test
- 1 2.0 mm pitch 20-pin camera interface
- On-board real-time clock battery
- Power interface (5 V), with power switch and indicator light

System Clock Source
- 12 MHz passive crystal

Real-Time Clock
- Internal real-time clock (with lithium battery back-up)

Expansion Interface
- 1 34-pin 2.0 mm GPIO interface
- 1 40-pin 2.0 mm system bus interface

Dimension
- 100 mm x 100 mm

Operating System Support
- Linux 2.6.29
- Windows CE .NET 5.0














CD-ROM Resources
(1) ADS 1.2 Setup
(2) H-JTAG debugging programmer software
(3) SJF2440 Flash programmer software under Windows
(4) Jflash-2440 NAND Flash programmer software under Linux (with source code)
(5) Serial tools CRT, DNW
(6) C language array image tools
(7) USB driver (install under Windows XP/2000)
(8) Vivi source code, the bootloader for Linux
(9) Most simple test program (included in the project documents of ADS) for the lighting of the LED lights on the board.
(10) 2440test test procedures (including ADS 1.2 project document, all the sourcecode), test items include: interruption of the way by key test, RTC real-time clock test, ADC test digital-to-analog conversion, IIS test wav audio player, IIS audio recording test, touch-screen test, I2C bus to read and write AT24C08 test, Samsung 3.5 "LCD, 640x480 true color LCD test
(11) Windows CE BSP and sample project files
(12) Linux development tools and kernel source code package:
- Arm-linux-gcc-4.3.2 with EABI: a unified cross-compiler
- Yaffs2 filesystem mapping tool mkyaffs2image
- Linux-2.6.29 kernel source code (including the DM9000 driver, all kinds of TFT
LCD drivers, audio input and output driver, touchscreen driver, YAFFS2 source code, high-speed large-capacity SD card driver, RTC driver, watchdog driver, 3 serial port driver, Universal USB camera driver, USB mouse and keyboard driver, etc.
(13) Embedded graphical interface Qtopia-2.2.0 source code package, embedded browser source code package
(14) Development board schematic diagram (Protel99SE format / PDF format)
(15) User's Manual (PDF format
ส่วนบนของฟอร์ม


Wednesday, August 24, 2011

PIC Microcontroller Programmer

ET-PGMPIC USB V2.0





ET-PGMPIC USB V2.0 is PIC Microcontroller Programmer which comes from MICROCHIP Co., Ltd and its specifications are equivalent to PicKit2 Programmer of MICROCHIP because it can program many numbers of PIC Microcontroller that are
Flash Memory (see list of PIC Microcontroller numbers at ETPGMPIC
USB V2.0 in File README of PicKit2 Software Program).

The characteristic feature of ET-PGMPIC USB V2.0 Programmer is USB Interface that makes user can apply conveniently and it is high speed for programming, so it takes a short time to program data. Moreover, user can upgrade new Firmware version from MICROCHIP (www.microchip.com). Besides the initial specifications above, ETT designs an additional Module for Emulator Programming that can program data into Target Board directly. So, it is the most convenient to develop program because user does not remove any IC from device and it protects the IC from bent or broken. Moreover, there is ET-PGM PIC TEXTTOOLS that is designed to support operation of ET-PGM PIC USB V2.0 in programming IC on TEXT Tool. In this case, it can support IC DIP-Type in various sizes and numbers; 12F, 16F, 18F and dsPIC.























Specifications of ET-PGMPIC USB V2.0
- Support applications with PIC Microcontroller
- Connect to computer through USB Port
- Use Power Supply from USB Port (Board ET-PGMPIC USB only)
- ICSP Port for In-Circuit Serial Programming
- LED to display statuses
- Be able to program by pressing Switch PROGRAM on Programmer
- Be able to program through Adaptor Modules

ชุด ET-PGM PIC USB V2 ปรับปรุงพัฒนาจากชุด ET-PGM PIC USB V1 ในส่วนวงจรให้เล็กกะทัดรัด และตัดส่วน TEXT TOOL สำหรับ COPY ออก โดยแยกเป็นชุดอิสระให้เลือกซื้อเพิ่มเติม (ET-PGM PIC TEXT TOOLS) ET-PGM PIC USB V2 คือ เครื่องโปรแกรมไมโครคอนโทรลเลอร์ตระกูล PIC ของ บริษัท MICROCHIP มีคุณสมบัติเทียบเท่ากับ เครื่องโปรแกรม PICKIT 2  ของทาง MICROCHIP โดย สามารถโปรแกรมไมโครคอนโทรลเลอร์ PIC ที่มีหน่วยความจำแบบ FLASH MEMORY ได้หลายเบอร์ (สามารถดูได้จาก READ ME ของโปรแกรม PICKIT 2 ของ MICROCHIP) ET-PGM PIC USB เชื่อมต่อกับคอมพิวเตอร์ พีซี ในการใช้งานทาง PORT USB, ใช้ไฟเลี้ยงจาก USB PORT, มีความเร็วในการโปรแกรมสูง

       
นอกจากนี้ยังสามารถอัพเกรดเฟิร์มแวร์เวอร์ชั่นใหม่ ๆ เบอร์ใหม่ ๆ ได้จาก WEB ( www.microchip.com )
[ ]  ออกแบบวงจรและบรรจุในกล่องพลาสติก กันฝุ่น, กันช็อตกับวงจรอื่นๆ ในการใช้งาน ขนาดกล่อง 7.5 x 2.5 x 5 cm. เล็กกระทัดรัด,สะดวกในการใช้ 
[ ]  ขั้วต่อแบบ MODULAR JACK RJ11 มาตรฐานของ บริษัท MICROCHIP (ICD2) 
[ ]  สามารถต่อใช้งานกับบอร์ดต่างๆ ในตระกูล MICROCHIP ของ อีทีที ที่เป็นรุ่น (ICD2) ได้โดยตรง เช่น
                                ET-BASE PIC8722 (ICD2)
                                CP-PIC V3 458/877 (ICD2)
                                CP-PIC V4 458/877 (ICD2)
                                CP-PIC USB/4550 (ICD2)
                                ET-PIC STAMP 18F8722 (ICD2)
                                ET-dsPIC33WEB V1
                                ET-PIC24WEB V1
                               
[ ]  ต่อใช้งานกับชุด ADAPTER MODULES ต่างๆ ของ อีทีที ในการใช้งาน COPY ข้อมูลเข้าตัว CPU ได้โดยตรงกับบอร์ดที่ ไม่มีขั้วต่อ (ICD2) อยู่บนบอร์ด โดยมี ให้เลือกใช้งานได้หลายๆ ขนาดตัวไอซี เช่น ชุด  ET-ADAPTER PIC USB-40A, ET-ADAPTER PIC USB-28A, ET-ADAPTER PIC USB-28B, ET-ADAPTER PIC USB-20A, ET-ADAPTER PIC USB-18A, ET-ADAPTER PIC USB-14A
[ ]  ต่อใช้งานได้กับชุด ET-PGM PIC TEXT TOOLS ของทาง อีทีที ในการ COPY CPU ของ MICROCHIP ได้ทั้งขนาด 8 PIN - 40 PIN DIP TYPE และสามารถใช้กับ dsPIC ได้ด้วย 
[ ]  ใช้งานกับ USB PORT บนเครื่องคอมพิวเตอร์พีซี, ทำงานบน OS WINDOWS XP/VISTA โดยใช้โปรแกรม PICKIT 2 ของ บริษัท MICROCHIP
 
ชุด ET-PGM PIC USB V2 ประกอบด้วย
                                   (1) บอร์ด พร้อมบอร์ดพร้อมกล่อง
                                   (2) สายต่อ USB TYPE A/B
                                   (3) สายต่อ RJ-ICD2
                                   (4) แผ่น CD-ROM

Tuesday, August 16, 2011

Microcontroller Digital Storage Oscilloscope

       

Microcontroller Digital Storage Oscilloscope

Description

People talked about an oscilloscope for DIYers, that’s how we know about JYE tech. Mr. Liu is an admirable experienced engineer, being the first generation of university EE student after culture revolution. His seriousness on documents and every detail amazed me. You will find complete document on their website, including demos and assemble guide. We are honored to carry their products, neat and handy for Arduino level electrical development.

Accessories:

Simple probe
Power Adapter (universal input voltage range)


















Features:

* Max sample rate - 5M/s (AUTO mode)8 bits
* Sample memory depth - 256 bytes
* Analog bandwidth - 1MHz
* Vertical sensitivity - 100mV/Div - 5V/Div
* Vertical position adjustable with indicator
* Input impedance - 1MΩ
* Max input voltage - 50Vpp
* DC/AC coupling
* Horizontal - 2μs/Div - 10m(minute)/Div
* Auto, normal and single trig modes
* Rising/falling edge trigger
* External trig available
* Trig level adjustable with indicator
* Hold/run feature
* Save up to 6 captures to EEPROM and retain after power down
* Retrieve and display saved captures
* Transfer its screen to PC as bitmap file via serial connection
* Built-in 500Hz/5Vpp test signal
* Frequency counter (only for TTL level input signal)
* 9 DC power supply
* Dimension: 110mm X 65mm X 25mm (without case)


Resources: